Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
142mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Base Part Number |
TLV3402 |
Pin Count |
8 |
Output Type |
CMOS, Open-Drain |
Number of Elements |
2 |
Nominal Supply Current |
640nA |
Power Dissipation |
142mW |
Output Current |
10mA |
Max Supply Current |
640nA |
Propagation Delay |
300 μs |
Quiescent Current |
950nA |
Response Time |
175000 ns |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
3.6mV |
Voltage Gain |
120dB |
Average Bias Current-Max (IIB) |
0.0001μA |
Power Supply Rejection Ratio (PSRR) |
105dB |
Supply Voltage Limit-Max |
17V |
Max Input Current |
250pA |
Input Bias Current |
250pA |
Current - Quiescent (Max) |
950nA |
Voltage - Input Offset (Max) |
3.6mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3402IDRG4 Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a CMOS, Open-Drain output type for this comparator.This package has been designed with Tape & Reel (TR) .8 terminals are found on the comparator.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical General Purpose comparator.A total of 2 elements can be found in it.The device is equipped with 8 pins.The recommended mounting method is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.This comparator has 8 pins.In order to find a solution that meets your specific needs, search TLV3402 for more pin-to-pin solutions.A quiescent current of 950nA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current of the device be 640nA .If the current supply exceeds 640nA , the comparator might be damaged.You are allowed to input a maximum current of 250pA into the device.According to the voltage formula, the part has a voltage gain of 120dB .This device is usually used in ADC circuits (packaged in TR ).
TLV3402IDRG4 Features
CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 950nA
Voltage Gain: 120dB
TLV3402IDRG4 Applications
There are a lot of Texas Instruments TLV3402IDRG4 linear comparators applications.
- Wearable Devices
- Zero-Crossing Detectors
- Battery-Powered Electronics
- Hand-Held Electronics
- Window Comparators
- Mobile Communications
- Power Supervision
- General-Purpose Portable Devices
- Notebooks and PDAs
- Appliances