TLV3501AIDBVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | TLV3501 |
| Pin Count | 6 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 5mA |
| Output Current | 74mA |
| Max Supply Current | 5mA |
| Propagation Delay | 10 ns |
| Quiescent Current | 5mA |
| Response Time | 7.5 ns |
| Common Mode Rejection Ratio | 70 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±1.35V~2.75V |
| Input Offset Voltage (Vos) | 6.5mV |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Max Input Current | 10pA |
| Input Bias Current | 10pA |
| Voltage - Input Offset (Max) | 6.5mV @ 5.5V |
| Current - Input Bias (Max) | 10pA @ 5.5V |
| Hysteresis | 6mV |
| CMRR, PSRR (Typ) | 70dB CMRR, 100dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV3501AIDBVTG4 Overview
In order to facilitate transportation, it is packaged in SOT-23-6 .The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.This chip is designed with the Tape & Reel (TR) package.The comparator has 6 terminals.The electrical component in this case belongs to the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a General Purpose chip.There are a total of 1 elements in it.As a result, it contains 6 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.The comparator is equipped with 6 pins.You can find more pin-to-pin solutions for your special requirements by searching TLV3501 .There is a quiescent current of 5mA in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 5mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 5mA .Input current to the device cannot exceed 10pA .The operating supply voltage for normal operation should be 5V .This device can be used in general (for example, in ADC circuits). It is packaged in TR .
TLV3501AIDBVTG4 Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 5mA
TLV3501AIDBVTG4 Applications
There are a lot of Texas Instruments TLV3501AIDBVTG4 linear comparators applications.
- High-Speed Differential Line Receiver
- Ultra-Low Power Systems
- Threshold Detectors
- Building automation
- Window Comparators
- Battery management and protection
- Lithium ion battery monitoring
- High-Speed Sampling Circuits
- Power Supervision
- Laptop Computers
