TLV3701CDBVTG4
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Comparator |
| Packing Method | TR |
| Max Power Dissipation | 385mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV3701 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Operating Supply Voltage | 15V |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Power Dissipation | 385mW |
| Output Current | 10mA |
| Max Supply Current | 800nA |
| Quiescent Current | 1μA |
| Response Time | 36 μs |
| Common Mode Rejection Ratio | 88 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~16V ±1.25V~8V |
| Input Offset Voltage (Vos) | 5mV |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 105dB |
| Dual Supply Voltage | 5V |
| Input Bias Current | 250pA |
| Voltage - Input Offset (Max) | 5mV @ 15V |
| Current - Input Bias (Max) | 250pA @ 15V |
| CMRR, PSRR (Typ) | 88dB CMRR, 105dB PSRR |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
TLV3701CDBVTG4 Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a type CMOS, Push-Pull, Rail-to-Rail output.The chip is packaged with Tape & Reel (TR) .5 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.Supplied by 2.7V voltage, the comparator can accomplish the many demanding tasks.This is a typical comparator of type General Purpose .This element consists of 1 elements in total.Electronic comparator includes 5 pins.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator has 5 pins.You can search TLV3701 if you are looking for more pin-to-pin solutions.The comparator presents a quiescent current of 1μA volts.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current for the device be set to 800nA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 800nA .A voltage gain of 120dB can be determined from the voltage formula for the part.Comparator electronics is necessary to have an operating supply voltage of 15V for normal operation.Often found in ADC circuits, this device is packed in TR .
TLV3701CDBVTG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701CDBVTG4 Applications
There are a lot of Texas Instruments TLV3701CDBVTG4 linear comparators applications.
- Battery management and protection
- RC Timers
- Set Top Boxes
- Body Control Modules
- Notebooks and PDAs
- Industrial
- Point of load regulators
- Infotainment & cluster
- General Purpose Low Voltage Applications
- Wide Range VCO; MOS Clock Timers
