Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
13.012431mg |
Operating Temperature |
-40°C~125°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Comparator |
Packing Method |
TR |
Max Power Dissipation |
385mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TLV3701 |
Pin Count |
5 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail |
Number of Elements |
1 |
Nominal Supply Current |
800nA |
Power Dissipation |
385mW |
Output Current |
10mA |
Max Supply Current |
800nA |
Quiescent Current |
1μA |
Response Time |
36 μs |
Common Mode Rejection Ratio |
88 dB |
Voltage - Supply, Single/Dual (±) |
2.7V~16V ±1.35V~8V |
Input Offset Voltage (Vos) |
5mV |
Voltage Gain |
120dB |
Power Supply Rejection Ratio (PSRR) |
105dB |
Max Input Current |
250pA |
Input Bias Current |
250pA |
Voltage - Input Offset (Max) |
5mV @ 15V |
Current - Input Bias (Max) |
250pA @ 15V |
CMRR, PSRR (Typ) |
88dB CMRR, 105dB PSRR |
Length |
2.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TLV3701IDBVRG4 Overview
A convenient packaging is provided in the form of SC-74A, SOT-753 .The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail .The part is shipped by Tape & Reel (TR) .The device is designed with 5 terminations.The chip belongs to Comparator .With a 5V voltage supply, the comparator can perform multiple demanding tasks.In general, the chip type can be classified as General Purpose .Electronic comparator consists of 1 elements in total.There are 5 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C to prevent malfunctions.The comparator has a pin count of 5 .You can find more pin-to-pin solutions for your special requirements by searching TLV3701 .As a result, this comparator displays a quiescent current of 1μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Normally, the nominal supply current should be 800nA when using the device.Current supply exceeding 800nA could cause disfunction of the compartator.Electronic comparator is possible to input a maximum of 250pA current into the device.From the voltage formula, the voltage gain of the part is 120dB .Packed in TR , this device is for general uses (often in ADC circuits).
TLV3701IDBVRG4 Features
CMOS, Push-Pull, Rail-to-Rail output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~125°C
Quiescent Current: 1μA
Voltage Gain: 120dB
TLV3701IDBVRG4 Applications
There are a lot of Texas Instruments TLV3701IDBVRG4 linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Handheld Instruments
- Window Comparators, Multivibrators
- Appliances
- Wearable Devices
- Building automation
- Zero-Crossing Detectors
- Pulse, Squarewave, and Time Delay Generators
- RC Timers
- Wireless Base Stations