TMS320DM6435ZWTQ6
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 361-LFBGA |
| Number of Pins | 361 |
| Weight | 789.392471mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | TMS320DM643x, DaVinci™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 361 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 660MHz |
| Base Part Number | 320DM6435 |
| Pin Count | 361 |
| Operating Supply Voltage | 3.3V |
| Interface | HPI, I2C, McASP, McBSP, UART, 10/100 Ethernet MAC |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 1.14V |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Number of UART Channels | 2 |
| Number of Timers | 5 |
| ROM Programmability | MROM |
| Barrel Shifter | NO |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (64kB) |
| Voltage - Core | 1.05V 1.20V |
| On Chip Data RAM | 240kB |
| Clock Rate | 600MHz |
| Height | 1.4mm |
| Length | 16mm |
| Width | 16mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TMS320DM6435ZWTQ6 Overview
In the 361-LFBGA package, it is a type of electronic component.It is provided with a packaging way of Tube.Due to its Fixed Point membership, it is ideal for a wide range of applications.The device is attached in a way that faces Surface Mount.If it is operating at the temperature of -40°C~125°C TJ, then it will be operating normally.This refers to the analog voltage range that can be input or output from 1.8V 3.3V.Digital signal processors such as this one are included in the TMS320DM643x, DaVinci? series.The terminations for its uses are 361.It operates with the supply voltage of 1.2V.The 361 component has pins.This configuration contains 361 pins.Many related parts can be identified by using the 320DM6435 part number as a base.In order for the device to operate at 660MHz frequency, there is a specific design.Mounting is accomplished using Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.This device can be powered by voltages as low as 1.14V.A maximum voltage of 3.63V can be provided to this device.In order for it to operate, 3.3V is the supply voltage.Data format and transmission speed can be configured for asynchronous serial communication on 2 UART channels.Industrial environments use 5 timers to provide accurate feedback and event activation.
TMS320DM6435ZWTQ6 Features
Supplied in the 361-LFBGA package
Operating supply voltage of 3.3V
TMS320DM6435ZWTQ6 Applications
There are a lot of Texas Instruments TMS320DM6435ZWTQ6 DSP applications.
- Digital image processing
- Dam design
- Statistical signal processing
- Finite impulse response digital filters
- Seismology
- Radar
- MP3 audio player
- Digital communications
- Machinery and equipment
- Instrument modeling
