TMUX1123DGKR
| Parameters | |
|---|---|
| Channel-to-Channel Matching (ΔRon) | 130m Ω |
| Crosstalk | -90dB @ 10MHz |
| Switch-on Time-Max | 190ns |
| Switch-off Time-Max | 190ns |
| Voltage - Supply, Single (V+) | 1.08V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TMUX1123 |
| JESD-30 Code | R-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Bandwidth | 300MHz |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 40 dB |
| Current - Leakage (IS(off)) (Max) | 80pA |
| Channel Capacitance (CS(off), CD(off)) | 6pF 10pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SPST |
| Charge Injection | 1.5pC |
TMUX1123DGKR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). High reliability is achieved by using advanced packaging method Tape & Reel (TR). 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. Turning on and running the electrical part should be easy with a 1.2V voltage supply. SPST switching circuits are used in these analog switch ics. 2 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with TMUX1123. The voltage required by this switch device is 1.08V~5.5V, draining from a single voltage supply. 300MHz bandwidths enable data to be transferred.
TMUX1123DGKR Features
1 Channels
Switch Circuit: SPST
-3db Bandwidth: 300MHz
Bandwidth: 300MHz
TMUX1123DGKR Applications
There are a lot of Texas Instruments TMUX1123DGKR Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Data Acquisition Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Cell phones
- PBX interfaces
- Audio/video switches
- Relay replacements
- Isolation
- Cable PC
