TPA0102PWP
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Feature | Input Multiplexer, Mute, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE AT 3.3V SUPPLY |
| HTS Code | 8542.33.00.01 |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.7W |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA0102 |
| Pin Count | 24 |
| Output Type | 2-Channel (Stereo) with Stereo Headphones |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 2 |
| Nominal Supply Current | 25mA |
| Power Dissipation | 2.7W |
| Max Supply Current | 25mA |
| Quiescent Current | 19mA |
| Output Power | 1.5W |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 25mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Output Power | 1.5W |
| Max Output Power x Channels @ Load | 1.5W x 2 @ 4 Ω |
| Harmonic Distortion | 1% |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 98.08935mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
TPA0102PWP Overview
There is a device embedded in 24-TSSOP (0.173, 4.40mm Width) Exposed Pad .In this case, it is packaged as Tube .24 terminations consist of terminating transmission lines with devices that match their characteristic impedance.This output is configured with 2-Channel (Stereo) with Stereo Headphones .There is Class AB type of electrical device associated with this device.As part of a signal interface in a computer or other communication device, there are 24 pins, which are pronged contacts.The chip is mounted by Surface Mount .In this electrical device, the supply voltage is 3V~5.5V .2 channels are present on the device.During operation, Input Multiplexer, Mute, Shutdown can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.The device contains 24 pins.Amp parts is included in Audio/Video Amplifiers .This chip is included in the TPA0102 family.In this case, the electronic part is mounted in the way of Surface Mount .A maximum output power of 1.5W kWh per hour is possible for this electronic part.As a general rule, the supply voltage (Vsup) should be maintained above 3V .In this electronic part, the supply type is Single .Its consumption of quiescent current is 19mA .Amp parts also includes CAN ALSO OPERATE AT 3.3V SUPPLY .
TPA0102PWP Features
24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
24 pin count
TPA0102 family
1.5W kWh per hour
TPA0102PWP Applications
There are a lot of Texas Instruments TPA0102PWP audio amplifiers applications.
- Signal filtering
- Switching amplifier
- Instrumentation
- Biopotential
- single/dual op amp sum and difference circuits
- Computer workstations and wireless base stations
- Band-stop filter
- High input resistance broadband
- Signal amplification
- Automation control systems
