TPA0211DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA0211 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) with Mono Headphones |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Operating Supply Current | 4mA |
| Nominal Supply Current | 6mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Output Power | 2W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 58dB |
| Gain | 2.5 dB |
| Max Output Power | 2W |
| Max Output Power x Channels @ Load | 2W x 1 @ 4 Ω; 92mW x 1 @ 32 Ω |
| Harmonic Distortion | 1% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA0211DGN Overview
This package is embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .The chip is recommended to be packaged in Tube case. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts uses 1-Channel (Mono) with Mono Headphones as Amp partss output.Amp parts is an electrical device of type Class AB .There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. The electronic component is mounted in the way of Surface Mount .The supply voltage of this electrical device is 2.5V~5.5V .There are 1 channels available on the device.Amp parts is possible to operate wAmp partsh Depop, Shutdown .A temperature greater than -40°C~85°C TA should not be used.Amp parts is equipped wAmp partsh 8 pin count.Amp parts is part of Audio/Video Amplifiers .The TPA0211 family contains this object.This electronic part has a maximum output power of 2W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.Vsup reaches 5.5V at the maximum.Amp parts is a Single supply type.The power supply is 3/5V .Its consumption of quiescent current is 4mA .
TPA0211DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA0211 family
2W kWh per hour
TPA0211DGN Applications
There are a lot of Texas Instruments TPA0211DGN audio amplifiers applications.
- Power control
- Precision measurement
- Signal filtering
- High-frequency data acquisition systems
- single/dual op amp sum and difference circuits
- Information processing
- Computer workstations and wireless base stations
- Oscilloscopes
- Band-pass filter
- Switching amplifier
