TPA0213DGQ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Input Multiplexer, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA0213 |
| Pin Count | 10 |
| Output Type | 1-Channel (Mono) with Stereo Headphones |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 6.3mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 6.3mA |
| Quiescent Current | 4.2mA |
| Output Power | 2W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 62dB |
| Gain | 8 dB |
| Max Output Power | 2W |
| Max Output Power x Channels @ Load | 2W x 1 @ 4 Ω; 90mW x 2 @ 32 Ω |
| Harmonic Distortion | 0.3% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA0213DGQ Overview
This package is embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in the case Tube .In 10 terminations, the transmission line is terminated with an impedance-matching device.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) with Stereo Headphones .The device belongs to the Class AB type of electrical devices.Computers and other communication devices feature 10 pins, which are pronged contacts.Amp parts is mounted in front of Surface Mount .In this electrical device, the supply voltage is 2.5V~5.5V .Currently, the device has only 1 channels.Depop, Input Multiplexer, Shutdown can be ensured when operating.The operating temperature should not exceed -40°C~85°C TA °C.The number of pins is 10 .This chip belongs to Audio/Video Amplifiers .This chip is included in the TPA0213 family.There is a maximum output power of 2W kWh per hour from this electronic component.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.5V .During this time, the maximum supply voltage (Vsup) reaches 5.5V .There is a supply type of Single for this electronic part.The power supply is 3/5V .Amp parts consumes 4.2mA of quiescent current wAmp partshout being affected by external factors.
TPA0213DGQ Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
TPA0213 family
2W kWh per hour
TPA0213DGQ Applications
There are a lot of Texas Instruments TPA0213DGQ audio amplifiers applications.
- High gain DC amplifier
- Displayers for aircraft and air transportation control systems
- Oscilloscopes
- Video conversion and routing
- Computer workstations and wireless base stations
- Portable electronic products powered by batteries
- Power generator
- Addition and subtraction operation circuits
- Automation control systems
- Scintillation detectors
