TPA2001D1PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 774mW |
| Technology | CMOS |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA2001 |
| Pin Count | 16 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Nominal Supply Current | 6mA |
| Power Dissipation | 774mW |
| Max Supply Current | 6mA |
| Quiescent Current | 4mA |
| Output Power | 1W |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Gain | 23.5 dB |
| Max Output Power | 1W |
| Max Output Power x Channels @ Load | 1W x 1 @ 8 Ω |
| Harmonic Distortion | 1% |
| Load Impedance | 8Ohm |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2001D1PW Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) .Amp parts is packaged in the way of Tube .There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts uses 1-Channel (Mono) as the output.An electrical device of type Class D is involved.Computers or other communication devices have 16 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .Electrical devices like this one have a 2.7V~5.5V supply voltage.The chip is equipped with 1 channels.Ensure that Depop, Differential Inputs, Short-Circuit Protection, Shutdown is maintained when operating.Ideally, the operating temperature should not exceed -40°C~85°C TA .A total of 16 pins are present on the device.Amp parts is included in Audio/Video Amplifiers .Amp parts belongs to TPA2001 family.An electronic part such as this has a maximum output power of 1W kWh per hour.During normal operation, the supply voltage (Vsup) should remain above 2.7V .5.5V is the maximum supply voltage (Vsup).Electronic parts with Single supply types are available.Power is supplied by a 3.3/5V volt source.The device consumes 4mA quiescent current
TPA2001D1PW Features
16-TSSOP (0.173, 4.40mm Width) package
16 pin count
TPA2001 family
1W kWh per hour
TPA2001D1PW Applications
There are a lot of Texas Instruments TPA2001D1PW audio amplifiers applications.
- Industrial control system
- Displayers for aircraft and air transportation control systems
- Oscilloscopes
- Signal transformation
- Comparator
- Inverse/same-phase proportional circuit
- Signal operation
- Weak signal detection
- Broadcasting
- Video and image computer boards
