TPA2005D1ZQYR
| Parameters | |
|---|---|
| Number of Pins | 15 |
| Weight | 11.793402mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 15 |
| ECCN Code | EAR99 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2W |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2005 |
| Pin Count | 15 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Power Dissipation | 2W |
| Quiescent Current | 2.8mA |
| Output Power | 1.4W |
| Common Mode Rejection Ratio | 68 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Max Output Power | 1.45W |
| Max Output Power x Channels @ Load | 1.45W x 1 @ 8 Ω |
| Harmonic Distortion | 10% |
| Height | 1mm |
| Length | 2.5mm |
| Width | 2.5mm |
| Thickness | 790μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 15-VFBGA |
| Surface Mount | YES |
TPA2005D1ZQYR Overview
I have embedded this device in 15-VFBGA .The chip is recommended to be packaged in Tape & Reel (TR) case. 15 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.In this case, it is an electrical device of type Class D .As part of the signal interface in a computer or other communication device, there are 15 pins.A part of this electronic device is mounted in the way of Surface Mount .Amp parts is powered by a voltage of 2.5V~5.5V volts.The chip is equipped with 1 channels.During operation, the value Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.There are 15 pins present on this device.Audio/Video Amplifiers contains it.The TPA2005 family includes it.In this electronic part, the output power is a maximum of 1.45W kWh per hour.A normal operation is dependent upon the supply voltage (Vsup) remaining above 2.5V .5.5V is the maximum supply voltage (Vsup).Electronic parts with Single supply types are available.The device is powered by a voltage supply of 3/5V volts.Despite external influences, it consumes 2.8mA of quiescent current.
TPA2005D1ZQYR Features
15-VFBGA package
15 pin count
TPA2005 family
1.45W kWh per hour
TPA2005D1ZQYR Applications
There are a lot of Texas Instruments TPA2005D1ZQYR audio amplifiers applications.
- Test and measurement instruments
- Scintillation detectors
- Communication
- Signal transformation
- Medical instruments
- Signal operation
- Portable electronic products powered by batteries
- Television broadcasting equipment
- Power transmission
- High speed sample
