TPA2010D1YEFR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | NanoStar™ |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 780mW |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPA2010 |
| Pin Count | 9 |
| Qualification Status | Not Qualified |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.8mA |
| Quiescent Current | 3.4mA |
| Output Power | 2.5W |
| Common Mode Rejection Ratio | 68 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Output Power | 2.5W |
| Max Output Power x Channels @ Load | 2.5W x 1 @ 4 Ω |
| Height Seated (Max) | 0.625mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TPA2010D1YEFR Overview
The device is embedded in 9-UFBGA, DSBGA .This device is packaged in the way of Tape & Reel (TR) .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 9 termination.Amp parts uses 1-Channel (Mono) as the output.An electrical device of type Class D is involved.There are 9 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. In this case, the electronic part is mounted in the way of Surface Mount .Its supply voltage is 2.5V~5.5V volts.This device is equipped with a total of 1 channels.Depop, Differential Inputs, Shutdown, Thermal Protection can be ensured when operating.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.In addition, it is equipped with 9 pins.As part of Audio/Video Amplifiers , this part is included.Amp parts belongs to TPA2010 family.A maximum output power of 2.5W kWh per hour is possible for this electronic part.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 2.5V .Amp parts reaches 5.5V when the maximum supply voltage (Vsup) is reached.There is a Single supply type on this electronic part.The device is powered by a voltage of 3/5V volts.This electronic part is a member of NanoStar? series.There is 3.4mA external influence on the consumption of quiescent current: it consumes 3.4mA of quiescent current.
TPA2010D1YEFR Features
9-UFBGA, DSBGA package
9 pin count
TPA2010 family
2.5W kWh per hour
NanoStar? series
TPA2010D1YEFR Applications
There are a lot of Texas Instruments TPA2010D1YEFR audio amplifiers applications.
- ECG equipment
- Semiconductor detectors
- High input resistance broadband
- Portable electronic products powered by batteries
- Addition and subtraction operation circuits
- Fission chambers
- Inverse/same-phase proportional circuit
- Test and measurement instruments
- Band-stop filter
- Broadcasting
