TPA2011D1YFFT
| Parameters | |
|---|---|
| Max Output Power | 3.24W |
| Max Output Power x Channels @ Load | 3.24W x 1 @ 4 Ω |
| Load Impedance | 2kOhm |
| Height | 625μm |
| Length | 1.4mm |
| Width | 1.4mm |
| Thickness | 425μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 9-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 9 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | Class D |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 525mW |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Base Part Number | TPA2011 |
| Pin Count | 9 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 525mW |
| Quiescent Current | 1.8mA |
| Output Power | 3.24W |
| Common Mode Rejection Ratio | 79 dB |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 86dB |
TPA2011D1YFFT Overview
There is a device embedded in 9-UFBGA, DSBGA .The chip is recommended to be packaged in Tape & Reel (TR) case. 9 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts is configured wAmp partsh an output of 1-Channel (Mono) .The type of this electrical device is Class D .Computers or other communication devices have 9 pins, which are pronged contacts.Electronic parts are mounted in the way of Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.The number of channels is growing strong/weak: 1 .The operation of Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .This device has 9 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is included in the TPA2011 family.This electronic component's maximum output power is 3.24W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.Vsup reaches 5.5V at the maximum.Amp parts operates from a 3/5V power supply.Amp parts consumes a quiescent current of 1.8mA .
TPA2011D1YFFT Features
9-UFBGA, DSBGA package
9 pin count
TPA2011 family
3.24W kWh per hour
TPA2011D1YFFT Applications
There are a lot of Texas Instruments TPA2011D1YFFT audio amplifiers applications.
- Proportional operation circuits
- Signal transformation
- Active probe
- Logarithmic and exponential operation circuits
- Switching amplifier
- Computer workstations and wireless base stations
- Video conversion and routing
- Band-stop filter
- Biopotential
- pH (acidity)
