TPA2012D2RTJR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 38.101759mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class D |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 5.2W |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA2012 |
| Pin Count | 20 |
| Output Type | 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 9mA |
| Power Dissipation | 5.2W |
| Max Supply Current | 9mA |
| Quiescent Current | 6mA |
| Output Power | 2.1W |
| Common Mode Rejection Ratio | 69 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 24dB |
| Power Supply Rejection Ratio (PSRR) | -75dB |
| Max Output Power | 2.1W |
| Max Output Power x Channels @ Load | 2.1W x 2 @ 4 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 4Ohm |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA2012D2RTJR Overview
There is a device embedded in 20-WFQFN Exposed Pad .Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.In 20 terminations, the transmission line is terminated with an impedance-matching device.In the configuration, 2-Channel (Stereo) is used as the output.The device is of type Class D .Computers and other communication devices feature 20 pins, which are pronged contacts.Electronic parts are mounted in the way of Surface Mount .This electrical device operates at 2.5V~5.5V volts.Amp parts is equipped wAmp partsh 2 channels.When operating, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.A temperature greater than -40°C~85°C TA should not be used.There are 20 pins present on this device.Amp parts is included in Audio/Video Amplifiers .Amp parts is a member of the family TPA2012 .The maximal Output Power of this electronic part is 2.1W kWh per hour.5.5V is the maximum supply voltage (Vsup).A Single supply type is used for this electronic part.Amp parts is powered by a 3/5V volt power supply.Despite external influences, it consumes 6mA of quiescent current.
TPA2012D2RTJR Features
20-WFQFN Exposed Pad package
20 pin count
TPA2012 family
2.1W kWh per hour
TPA2012D2RTJR Applications
There are a lot of Texas Instruments TPA2012D2RTJR audio amplifiers applications.
- Displayers for aircraft and air transportation control systems
- Biopotential
- Test and measurement instruments
- Professional videography
- Industrial control system
- Integrator and differentiator circuits
- Band-pass filter
- Computer workstations and wireless base stations
- Proportional operation circuits
- Communication
