banner_page

TPA2033D1YZFR

3mA mA20 kHz kHz2.75W WAudio Amplifiers625μm mm1.75mm mm480mW W5.5V V9 pins9-UFBGA, DSBGA


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPA2033D1YZFR
  • Package: 9-UFBGA, DSBGA
  • Datasheet: PDF
  • Stock: 193
  • Description: 3mA mA20 kHz kHz2.75W WAudio Amplifiers625μm mm1.75mm mm480mW W5.5V V9 pins9-UFBGA, DSBGA (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 23 hours ago)
Mounting Type Surface Mount
Package / Case 9-UFBGA, DSBGA
Surface Mount YES
Number of Pins 9
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Series NanoFree™
JESD-609 Code e1
Feature Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 9
Type Class D
Terminal Finish Tin/Silver/Copper (Sn/Ag/Cu)
Subcategory Audio/Video Amplifiers
Max Power Dissipation 480mW
Technology CMOS
Voltage - Supply 2.5V~5.5V
Terminal Position BOTTOM
Terminal Form BALL
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Terminal Pitch 0.5mm
Base Part Number TPA2033
Pin Count 9
Output Type 1-Channel (Mono)
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3/5V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Nominal Supply Current 3mA
Power Dissipation 480mW
Quiescent Current 4mA
Output Power 2.75W
Common Mode Rejection Ratio 69 dB
Supply Type Single
Bandwidth 20 kHz
Voltage Gain 9.5dB
Power Supply Rejection Ratio (PSRR) -75dB
Gain 9.5 dB
Max Output Power 2.75W
Max Output Power x Channels @ Load 2.75W x 1 @ 4 Ω
Height 625μm
Length 1.75mm
Width 1.75mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead

TPA2033D1YZFR Overview


In the 9-UFBGA, DSBGA package, it is embedded.Amp parts is recommended that the chip be packaged in a Tape & Reel (TR) case.In addition, there are 9 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.Output 1-Channel (Mono) is configured for this device.There is Class D type of electrical device associated with this device.The computer or other communication device has 9 pins, which are pronged contacts.Amp parts is mounted in the way of Surface Mount .There is 2.5V~5.5V supply voltage for this electrical device.1 channels are provided by the device.Ensure that Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown is maintained when operating.Temperatures should not exceed -40°C~85°C TA .The device is equipped with a total of 9 pins.Audio/Video Amplifiers contains it.This is a member of the TPA2033 family.A maximum output power of 2.75W kWh per hour can be achieved with this electronic part.Amp parts is important to keep the supply voltage (Vsup) above 2.5V so that the device functions normally.5.5V is the maximum supply voltage (Vsup).Electronic parts with Single supply types are available.The device is powered by a voltage of 3/5V volts.Amp parts is a part of the NanoFree? series.Amp parts consumes 4mA of quiescent current wAmp partshout being affected by external factors.

TPA2033D1YZFR Features


9-UFBGA, DSBGA package
9 pin count
TPA2033 family
2.75W kWh per hour
NanoFree? series

TPA2033D1YZFR Applications


There are a lot of Texas Instruments TPA2033D1YZFR audio amplifiers applications.

  • Proportional operation circuits
  • Semiconductor detectors
  • Switching amplifier
  • Instrumentation
  • Industrial control system
  • Logarithmic and exponential operation circuits
  • Band-pass filter
  • Vehicle electronics
  • Power generator
  • Test equipment

Write a review

Note: HTML is not translated!
    Bad           Good