TPA4411MRTJT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 38.101759mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | DirectPath™ |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 3.45W |
| Voltage - Supply | 1.8V~4.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA4411 |
| Pin Count | 20 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 4.5V |
| Power Supplies | 1.8/4.5V |
| Supply Voltage-Min (Vsup) | 1.8V |
| Number of Channels | 2 |
| Nominal Supply Current | 10mA |
| Power Dissipation | 3.45W |
| Max Supply Current | 10mA |
| Quiescent Current | 8mA |
| Output Power | 80mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 63.52dB |
| Power Supply Rejection Ratio (PSRR) | -80dB |
| Gain | 63.52 dB |
| Max Output Power | 100mW |
| Max Output Power x Channels @ Load | 100mW x 2 @ 16 Ω |
| Harmonic Distortion | 1% |
| Load Impedance | 16Ohm |
| Height | 800μm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 730μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA4411MRTJT Overview
I have embedded this device in 20-WFQFN Exposed Pad .Amp parts is packaged in the way of Tape & Reel (TR) .20 terminations consist of terminating transmission lines with devices that match their characteristic impedance.Amp parts uses Headphones, 2-Channel (Stereo) as the output.The device is of type Class AB .As part of the signal interface in a computer or other communication device, there are 20 pins.The chip is mounted by Surface Mount .In this electrical device, the supply voltage is 1.8V~4.5V .There are no channels on the device.Amp parts is possible to guarantee Depop, Short-Circuit and Thermal Protection, Shutdown when operating.Amp parts is recommended that the operating temperature do not exceed -40°C~85°C TA °C.This device has 20 pins.Audio/Video Amplifiers incorporates this part.This chip is included in the TPA4411 family.There is a maximum output power of 100mW kWh per hour from this electronic component.To ensure normal operation, the supply voltage (Vsup) must be maintained above 1.8V .The maximal supply voltage (Vsup) reaches 4.5V .In this electronic part, the supply type is Single .Power supply for this device is 1.8/4.5V volts.This electronic part is a member of DirectPath? series.Despite being unaffected by external factors, it consumes 8mA of quiescent current.
TPA4411MRTJT Features
20-WFQFN Exposed Pad package
20 pin count
TPA4411 family
100mW kWh per hour
DirectPath? series
TPA4411MRTJT Applications
There are a lot of Texas Instruments TPA4411MRTJT audio amplifiers applications.
- Instrumentation
- Radar
- Automation control systems
- High gain DC amplifier
- Inverse/same-phase proportional circuit
- High-frequency data acquisition systems
- High speed sample
- Comparator
- Professional videography
- Communication
