TPA6102A2DGKR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 469mW |
| Technology | CMOS |
| Voltage - Supply | 1.6V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6102 |
| Pin Count | 8 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Operating Supply Voltage | 3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1.6V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 469mW |
| Quiescent Current | 750μA |
| Output Power | 50mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Voltage Gain | 14dB |
| Power Supply Rejection Ratio (PSRR) | 72dB |
| Gain | 14 dB |
| Max Output Power | 50mW |
| Max Output Power x Channels @ Load | 50mW x 2 @ 16 Ω |
| Harmonic Distortion | 0.1% |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6102A2DGKR Overview
In 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) is embedded this device.Amp parts is packaged in the way of Tape & Reel (TR) .In 8 terminations, the transmission line is terminated with an impedance-matching device.Amp parts uses Headphones, 2-Channel (Stereo) as the output.The device is of type Class AB .In a computer or other communication device, there are two pronged contacts called 8 pins.The electronic part is positioned in the way of Surface Mount .This electrical device has a supply voltage of 1.6V~3.6V .There are no channels on the device.Ensure that Depop, Short-Circuit and Thermal Protection, Shutdown is maintained when operating.A temperature greater than -40°C~85°C TA should not be used.A total of 8 pins are present in it.There is a part belonging to Audio/Video Amplifiers .Amp parts is included in the TPA6102 family.The maximal Output Power of this electronic part is 50mW kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 1.6V to ensure proper operation of the device.3.6V represents the maximal supply voltage (Vsup).Amp parts is an electronic part wAmp partsh a supply type of Single .The device consumes 750μA quiescent current and is unaffected by external influences.The superior flexibility of the circuit is achieved through the use of 2 circuits.
TPA6102A2DGKR Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package
8 pin count
TPA6102 family
50mW kWh per hour
TPA6102A2DGKR Applications
There are a lot of Texas Instruments TPA6102A2DGKR audio amplifiers applications.
- Signal amplification
- Instrumentation
- Test equipment
- Biopotential
- ECG equipment
- Integrator and differentiator circuits
- Signal filtering
- Weak signal detection
- Power generator
- Addition and subtraction operation circuits
