TPA6112A2DGQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPA6112 |
| Pin Count | 10 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 3mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.5mA |
| Output Power | 150mW |
| Supply Type | Single |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | 83dB |
| Max Output Power | 150mW |
| Max Output Power x Channels @ Load | 150mW x 2 @ 8 Ω |
| Harmonic Distortion | 0.1% |
| Load Impedance | 8Ohm |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6112A2DGQR Overview
There is a device embedded in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad .Ideally, the chip should be packaged in a Cut Tape (CT) case.In addition, 10 terminations are used, which entail the termination of a transmission line with a device whose characteristic impedance matches the line's.Headphones, 2-Channel (Stereo) is used for its output.The device belongs to the Class AB type of electrical devices.Computers and other communication devices feature 10 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount .There is 2.5V~5.5V voltage supply to this electrical device.The number of channels is growing strong/weak: 2 .The operation of Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.A temperature greater than -40°C~85°C TA should not be used.There are 10 pins present on this device.Audio/Video Amplifiers incorporates this part.This chip is included in the TPA6112 family.A maximum output power of 150mW kWh per hour can be achieved with this electronic part.5.5V represents the maximal supply voltage (Vsup).The supply type of this electronic part is Single .This device runs on a power supply of 3.3/5V volts.Amp parts consumes a quiescent current of 1.5mA .
TPA6112A2DGQR Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package
10 pin count
TPA6112 family
150mW kWh per hour
TPA6112A2DGQR Applications
There are a lot of Texas Instruments TPA6112A2DGQR audio amplifiers applications.
- Active probe
- Semiconductor detectors
- High input resistance broadband
- Band-stop filter
- Medical instruments
- High-frequency data acquisition systems
- Proportional counter tubes
- Test equipment
- Precision measurement
- Integrator and differentiator circuits
