TPA6120A2DWPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.8W |
| Technology | BIPOLAR |
| Voltage - Supply | 10V~30V ±5V~15V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA6120 |
| Pin Count | 20 |
| Output Type | Headphones, 2-Channel (Stereo) |
| Number of Channels | 2 |
| Nominal Supply Current | 26mA |
| Power Dissipation | 2.8W |
| Output Power | 1.5W |
| Slew Rate | 1300 V/μs |
| Common Mode Rejection Ratio | 100 dB |
| Supply Type | Dual, Single |
| Input Offset Voltage (Vos) | 5mV |
| Bandwidth | 22 kHz |
| Power Supply Rejection Ratio (PSRR) | 75dB |
| Max Dual Supply Voltage | 15V |
| Max Output Power | 80mW |
| Min Dual Supply Voltage | 5V |
| Dual Supply Voltage | 12V |
| Max Output Power x Channels @ Load | 80mW x 2 @ 600 Ω |
| Load Impedance | 32Ohm |
| Height | 2.65mm |
| Length | 12.82mm |
| Width | 7.52mm |
| Thickness | 2.55mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6120A2DWPG4 Overview
The device is embedded in 20-SOIC (0.295, 7.50mm Width) Exposed Pad .Amp parts is recommended that the chip be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 20 termination.Amp parts is configured wAmp partsh an output of Headphones, 2-Channel (Stereo) .Class AB is the type of this electrical device.In a computer or other communication device, there are two pronged contacts called 20 pins.Amp parts is mounted in the way of Surface Mount .The supply voltage of this electrical device is 10V~30V ±5V~15V .Amp parts is equipped wAmp partsh 2 channels.Operation can be ensured by Differential Inputs, Short-Circuit and Thermal Protection .The operating temperature should not exceed -40°C~85°C TA °C.A total of 20 pins are present in it.Amp parts is included in Audio/Video Amplifiers .Amp parts is a member of the family TPA6120 .An electronic part such as this has a maximum output power of 80mW kWh per hour.There is a Dual, Single supply type on this electronic part.In addAmplifier parts supplierion, amplifier parts supplier is characterized by IT CAN ALSO OPERATE WITH 10V TO 30V SINGLE SUPPLY .
TPA6120A2DWPG4 Features
20-SOIC (0.295, 7.50mm Width) Exposed Pad package
20 pin count
TPA6120 family
80mW kWh per hour
TPA6120A2DWPG4 Applications
There are a lot of Texas Instruments TPA6120A2DWPG4 audio amplifiers applications.
- Displayers for aircraft and air transportation control systems
- Portable electronic products powered by batteries
- Multiplication and division circuits
- Broadcasting
- Professional videography
- Proportional operation circuits
- Comparator
- Addition and subtraction operation circuits
- Switching amplifier
- Automation control systems
