TPA6203A1DRB
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 2.7W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6203 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2mA |
| Power Dissipation | 2.7W |
| Quiescent Current | 1.7mA |
| Output Power | 1.25W |
| Common Mode Rejection Ratio | 70 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -90dB |
| Max Output Power | 1.25W |
| Max Output Power x Channels @ Load | 1.25W x 1 @ 8 Ω |
| Harmonic Distortion | 1% |
| Load Impedance | 8Ohm |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6203A1DRB Overview
I have embedded this device in 8-VDFN Exposed Pad .In this case, it is packaged as Tube .Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.1-Channel (Mono) is the output configured for it.Class AB is the type of this electrical device.As part of a signal interface in a computer or other communication device, there are 8 pins, which are pronged contacts.A part of this electronic device is mounted in the way of Surface Mount .Electrical devices like this one have a 2.5V~5.5V supply voltage.This device is equipped with a total of 1 channels.During operation, the value Depop, Differential Inputs, Shutdown, Thermal Protection can be ensured.The operating temperature should not exceed -40°C~85°C TA °C.A total of 8 pins are present on the device.Amp parts is included in the TPA6203 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 1.25W kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.The maximal supply voltage (Vsup) reaches 5.5V .Amp parts is an electronic part wAmp partsh a supply type of Single .Despite external influences, it consumes 1.7mA of quiescent current.
TPA6203A1DRB Features
8-VDFN Exposed Pad package
8 pin count
TPA6203 family
1.25W kWh per hour
TPA6203A1DRB Applications
There are a lot of Texas Instruments TPA6203A1DRB audio amplifiers applications.
- Signal filtering
- Active probe
- Automation control systems
- Instrumentation
- Inverse/same-phase proportional circuit
- Multiplication and division circuits
- Medical instruments
- Integrator and differentiator circuits
- Video and image computer boards
- Oscilloscopes
