TPA6211A1DGNG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Differential Inputs, Shutdown, Thermal Protection |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.13W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA6211 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 4mA |
| Power Dissipation | 2.13W |
| Quiescent Current | 4mA |
| Output Power | 3.1W |
| Common Mode Rejection Ratio | 63 dB |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Power Supply Rejection Ratio (PSRR) | -85dB |
| Max Output Power | 3.1W |
| Max Output Power x Channels @ Load | 3.1W x 1 @ 3 Ω |
| Harmonic Distortion | 10% |
| Load Impedance | 3Ohm |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA6211A1DGNG4 Overview
A device has been embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Ideally, the chip should be packaged in a Tube case.Amp parts is possible to terminate a transmission line wAmp partsh a device matching Amp partss characteristic impedance, referred to as a 8 termination.Amp parts uses 1-Channel (Mono) as Amp partss output.An electrical device of type Class AB is involved.The computer or other communication device has 8 pins, which are pronged contacts.The chip is mounted by Surface Mount .There is 2.5V~5.5V supply voltage for this electrical device.1 channels are present on the device.Depop, Differential Inputs, Shutdown, Thermal Protection can be ensured when operating.Amp parts is recommended that the operating temperature not exceed -40°C~85°C TA .The device is equipped with 8 pins.This chip belongs to Audio/Video Amplifiers .Amp parts is part of the TPA6211 family.This electronic part has a maximum output power of 3.1W kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.5V .During this time, the maximum supply voltage (Vsup) reaches 5.5V .There is a Single supply type on this electronic part.Amp parts is powered by a 3/5V volt power supply.Despite external influences, it consumes 4mA of quiescent current.
TPA6211A1DGNG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA6211 family
3.1W kWh per hour
TPA6211A1DGNG4 Applications
There are a lot of Texas Instruments TPA6211A1DGNG4 audio amplifiers applications.
- Precision measurement
- Comparator
- Communication device
- Medical instruments
- Vehicle electronics
- Weak signal detection
- Oscilloscopes
- Addition and subtraction operation circuits
- Radar
- Active probe
