TPA711DGN
| Parameters | |
|---|---|
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA711 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 2.5mA |
| Quiescent Current | 1.25mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 4 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.3% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
TPA711DGN Overview
A device has been embedded in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad .Tube is the packaging method.8 terminations occur when a transmission line is terminated by a device with the same characteristic impedance as the transmission line.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.In this case, it is an electrical device of type Class AB .As part of the signal interface in a computer or other communication device, there are 8 pins.This electronic part is mounted in the way of Surface Mount .This electrical device has a 2.5V~5.5V supply voltage.The number of channels is growing strong/weak: 1 .Amp parts is possible to guarantee Depop, Short-Circuit and Thermal Protection, Shutdown when operating.Temperatures should not exceed -40°C~85°C TA .Amp parts is equipped wAmp partsh 8 pin count.There is a part belonging to Audio/Video Amplifiers .Amp parts is included in the TPA711 family.This electronic part has a maximum output power of 700mW kWh per hour.To ensure normal operation, it is important to maintain the supply voltage (Vsup) above 2.5V .The maximal supply voltage (Vsup) reaches 5.5V .Electronic parts with Single supply types are available.Amp parts is powered by a 3.3/5V volt power supply.1.25mA external influences affect the amount of quiescent current consumed by this device.
TPA711DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA711 family
700mW kWh per hour
TPA711DGN Applications
There are a lot of Texas Instruments TPA711DGN audio amplifiers applications.
- Band-pass filter
- Professional videography
- ECG equipment
- Proportional operation circuits
- Automation control systems
- Displayers for aircraft and air transportation control systems
- Scintillation detectors
- Addition and subtraction operation circuits
- Information processing
- High/low-pass filter circuit
