banner_page

TPA711DR

2.5mA mA2.5mA mA4 kHz kHz700mW WAudio Amplifiers1.75mm mm3.91mm mm725mW W5.5V V8 pins8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPA711DR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 887
  • Description: 2.5mA mA2.5mA mA4 kHz kHz700mW WAudio Amplifiers1.75mm mm3.91mm mm725mW W5.5V V8 pins8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 75.891673mg
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Depop, Short-Circuit and Thermal Protection, Shutdown
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Type Class AB
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Audio/Video Amplifiers
Max Power Dissipation 725mW
Technology CMOS
Voltage - Supply 2.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Base Part Number TPA711
Pin Count 8
Output Type 1-Channel (Mono)
Supply Voltage-Max (Vsup) 5.5V
Power Supplies 3.3/5V
Supply Voltage-Min (Vsup) 2.5V
Number of Channels 1
Nominal Supply Current 2.5mA
Power Dissipation 725mW
Max Supply Current 2.5mA
Quiescent Current 1.25mA
Output Power 700mW
Supply Type Single
Bandwidth 4 kHz
Gain Bandwidth Product 1.4MHz
Power Supply Rejection Ratio (PSRR) 85dB
Max Output Power 700mW
Max Output Power x Channels @ Load 700mW x 1 @ 8 Ω
Harmonic Distortion 0.3%
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPA711DR Overview


I have embedded this device in 8-SOIC (0.154, 3.90mm Width) .Amp parts is recommended that the chip be packaged in the case Tape & Reel (TR) .In addition, there are 8 terminations, which involve the termination of a transmission line with a device that matches the characteristic impedance of the line.1-Channel (Mono) is the output configured for it.The device belongs to the Class AB type of electrical devices.As part of the signal interface in a computer or other communication device, there are 8 pins.The electronic part is positioned in the way of Surface Mount .This electrical device is powered by 2.5V~5.5V volts.1 channels are provided by the device.Operating with Depop, Short-Circuit and Thermal Protection, Shutdown is possible.The operating temperature should not exceed -40°C~85°C TA °C.This device has 8 pins.Amp parts is included in Audio/Video Amplifiers .Amp parts is included in the TPA711 family.As a result of the limAmp partsations of this electronic part, Amp parts has a maximum output power of 700mW kWh per hour.For normal operation, the supply voltage (Vsup) should be kept above 2.5V .The maximal supply voltage (Vsup) reaches 5.5V .There is a supply type of Single for this electronic part.Amp parts operates from a 3.3/5V power supply.The device consumes 1.25mA quiescent current and is unaffected by external influences.

TPA711DR Features


8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA711 family
700mW kWh per hour

TPA711DR Applications


There are a lot of Texas Instruments TPA711DR audio amplifiers applications.

  • Information processing
  • Instrumentation
  • Broadcasting
  • Signal transformation
  • High-frequency data acquisition systems
  • High gain DC amplifier
  • Displayers for aircraft and air transportation control systems
  • Fission chambers
  • Inverse/same-phase proportional circuit
  • Band-stop filter

Write a review

Note: HTML is not translated!
    Bad           Good