TPA721D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 10 hours ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Depop, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 725mW |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPA721 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 725mW |
| Max Supply Current | 2.5mA |
| Quiescent Current | 1.25mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 4 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Number of Amplifiers | 1 |
| Load Impedance | 8Ohm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA721D Overview
This package is embedded in 8-SOIC (0.154, 3.90mm Width) .Ideally, the chip should be packaged in a Tube case.Amp parts is configured to produce 1-Channel (Mono) as Amp partss output.This electrical device has the type Class AB .Computers or other communication devices have 8 pins, which are pronged contacts.In this case, the electronic part is mounted in the way of Surface Mount .The supply voltage of this electrical device is 2.5V~5.5V .1 channels are available on the device.The operation of Depop, Short-Circuit and Thermal Protection, Shutdown can be ensured.The operating temperature should not exceed -40°C~85°C TA .This device has 8 pins.This chip belongs to Audio/Video Amplifiers .Amp parts is a member of the family TPA721 .There is a maximum output power of 700mW kWh per hour from this electronic component.During normal operation, the supply voltage (Vsup) should remain above 2.5V .Vsup reaches 5.5V at the maximum.There is a supply type of Single for this electronic part.The device consumes 1.25mA quiescent currentAs a result, there are 1 amplifiers, which are electronic devices that increase the voltage, current, or power of a signal.
TPA721D Features
8-SOIC (0.154, 3.90mm Width) package
8 pin count
TPA721 family
700mW kWh per hour
TPA721D Applications
There are a lot of Texas Instruments TPA721D audio amplifiers applications.
- Inverse/same-phase proportional circuit
- Automotive sensors
- Biopotential
- High gain DC amplifier
- Logarithmic and exponential operation circuits
- Active probe
- Signal transformation
- Band-pass filter
- Medical instruments
- Industrial control system
