TPA731DGN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA731 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Max Supply Current | 2.5mA |
| Quiescent Current | 1.55mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Load Impedance | 8Ohm |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPA731DGN Overview
In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package, it is embedded.There is a package in the form of Tube .There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.Amp parts uses 1-Channel (Mono) as the output.The device belongs to the Class AB type of electrical devices.The computer or other communication device has 8 pins, which are pronged contacts.There is an electronic part mounted in the way of Surface Mount .The supply voltage of this electrical device is 2.5V~5.5V .Channels 1 are present in the device.When operating, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Ideally, the operating temperature should not exceed -40°C~85°C TA .In addition, it is equipped with 8 pins.This chip belongs to Audio/Video Amplifiers .Amp parts belongs to the TPA731 family.This electronic part has a maximum output power of 700mW kWh per hour.Amp parts is recommended that the supply voltage (Vsup) be kept above 2.5V to ensure proper operation of the device.5.5V is reached as the maximal supply voltage (Vsup).In this electronic part, the supply type is Single .As long as external factors do not affect it, it consumes 1.55mA of quiescent current.
TPA731DGN Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA731 family
700mW kWh per hour
TPA731DGN Applications
There are a lot of Texas Instruments TPA731DGN audio amplifiers applications.
- Communication device
- ECG equipment
- Automotive sensors
- Scintillation detectors
- Industrial control system
- Test and measurement instruments
- Proportional operation circuits
- High input resistance broadband
- Band-stop filter
- Oscilloscopes
