TPA731DGNG4
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Nominal Supply Current | 2.5mA |
| Power Dissipation | 2.14W |
| Quiescent Current | 1.55mA |
| Output Power | 700mW |
| Supply Type | Single |
| Bandwidth | 20 kHz |
| Gain Bandwidth Product | 1.4MHz |
| Power Supply Rejection Ratio (PSRR) | 85dB |
| Max Output Power | 700mW |
| Max Output Power x Channels @ Load | 700mW x 1 @ 8 Ω |
| Harmonic Distortion | 0.5% |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 18.99418mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Differential Inputs, Short-Circuit and Thermal Protection, Shutdown |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Class AB |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Audio/Video Amplifiers |
| Max Power Dissipation | 2.14W |
| Technology | CMOS |
| Voltage - Supply | 2.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPA731 |
| Pin Count | 8 |
| Output Type | 1-Channel (Mono) |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
TPA731DGNG4 Overview
In 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad is embedded this device.Amp parts is recommended that the chip be packaged in the case Tube .8 terminations consist of terminating transmission lines with devices that match their characteristic impedance.The output it is configured with uses 1-Channel (Mono) .Amp parts is an electrical device of type Class AB .There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. Electronic parts are mounted in the way of Surface Mount .There is 2.5V~5.5V supply voltage for this electrical device.The chip is equipped with 1 channels.During operation, the value Differential Inputs, Short-Circuit and Thermal Protection, Shutdown can be ensured.Ideally, the operating temperature should not exceed -40°C~85°C TA .In addition, it is equipped with 8 pins.The item belongs to Audio/Video Amplifiers .Amp parts is a member of the family TPA731 .The maximal Output Power of this electronic part is 700mW kWh per hour.To ensure normal operation, the supply voltage (Vsup) must be maintained above 2.5V .In this case, the maximum supply voltage (Vsup) reaches 5.5V .Amp parts is an electronic part wAmp partsh a supply type of Single .Amp parts consumes 1.55mA of quiescent current wAmp partshout being affected by external factors.
TPA731DGNG4 Features
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad package
8 pin count
TPA731 family
700mW kWh per hour
TPA731DGNG4 Applications
There are a lot of Texas Instruments TPA731DGNG4 audio amplifiers applications.
- High-frequency data acquisition systems
- Video conversion and routing
- Broadcasting
- Radar
- Automation control systems
- Instrumentation
- Signal operation
- Portable electronic products powered by batteries
- Test equipment
- Communication
