TPIC6C596N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 951.693491mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | TPIC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | TPIC6C596 |
| Function | Serial to Parallel, Serial |
| Number of Outputs | 8 |
| Output Voltage | 33V |
| Output Type | Open Drain |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 80 ns |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPIC6C596N Overview
In package 16-DIP (0.300, 7.62mm), there is an embedded device. Tube is the case in which it is packed. 1 elements make up this part. It has 16 pins. It is recommended that the mount should be done by Through Hole. There is a component mounted in the way of Through Hole on this board. -40°C~125°C is the range of operating temperatures for the device. Votage is supplied within 4.5V~5.5V. In this case, the electrical component belongs to the series TPIC. If you use the TPIC6C596 family, you can find parts that are similar. A range of 5V is noted as the operating supply voltage of this chip. As far as the device is concerned, there are 1 input lines available. The total number of IC chip bits is 8. It is recommended that it be used at temperatures below 125°C. Ideally, it should not fall below -40°C. It is used under the 5.5V supply voltage. A voltage higher than 4.5V is used as a supply voltage. A total of 9 output lines need to be operated. 1 circuits are present in this device. It is equipped with 8 outputs.
TPIC6C596N Features
With 16 pins
Mounted in Through Hole type.
Based on TPIC6C596 family
Operate supply voltage at 5V
With 9 output lines
TPIC6C596N Applications
There are a lot of Texas Instruments TPIC6C596N Shift Registers applications.
- 8-bit data storage
- Pulse Extenders
- Counter
- Remote control holding register
- Serial-to-parallel data conversion
- data manipulation
- data transfer
- LED matrix control
- Sequence generator
- Generate time delay toward digital circuits
