TPS2002CDRCR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS2002 |
| Pin Count | 10 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 75μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 2.4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 3.25 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
TPS2002CDRCR Overview
The LED driver's packaged as a Tape & Reel (TR).It is included with the 10-VFDFN Exposed Pad package as well.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver is equipped with 2 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Features of the lighting driver are Status Flag.I believe it belongs to the TPS2002 family.In total, there are 10 terminations.In order to operate, the 10 pins are used.The LED driver has 1 functions.From the lighting driver, there is a maximum output of 2AV.As long as the supply voltage is 5V, high efficiency can be achieved.A total of 10 pins are present on it.There is 84mOhm resistance on the LED driver.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 2 channels are available for you to choose from.The maximum input voltage of the LED driver is 5.5V volts.A voltage of 4.5V volts is the minimum input voltage.
TPS2002CDRCR Features
Supplied from 5V
Resistance of 84mOhm
2 channels
TPS2002CDRCR Applications
There are a lot of Texas Instruments TPS2002CDRCR Power Switches ICs applications.
- Solid-State Drives
- Portable Devices
- Mobile Communication Devices
- Portable/Handheld Devices
- Hard Disk Drives
- Hot Swaps
- Gaming
- Notebook PC
- USB Protection
- Storage Drives
