TPS2013DR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | TPS2013 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 73μA |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 73μA |
| Adjustable Threshold | NO |
| Quiescent Current | 73μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Min Current Limit | 1.65A |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Drain to Source Resistance | 95mOhm |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2013DR Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.In this LED driver, there are no outputs available.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.There is a TPS2013 family of things that it belongs to.A total of 8 terminations have been recorded.8 pins are used for operation.The LED driver has 1 functions.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.The supply voltage of 3V is conducive to high efficiency.A total of 8 pins are included in this LED driver.75mOhm is the resistance of the lighting driver.It is set to 1.5A in this case.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.For maximum efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.73μA is the maximum current required to operate it.
TPS2013DR Features
Supplied from 3V
Resistance of 75mOhm
1 channels
TPS2013DR Applications
There are a lot of Texas Instruments TPS2013DR Power Switches ICs applications.
- Notebook and Tablet Computers
- Wireless Headsets
- Portable Music Players
- Smart Phones, Feature Phones
- USB Protection
- Mobile Communication Devices
- USB3.1 Power Delivery
- USB Power Distribution
- Hot Swap
- Gaming
