banner_page

TPS2021DR

3/5V N-Channel PMIC TPS2021 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2021DR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 931
  • Description: 3/5V N-Channel PMIC TPS2021 8 Pin 3.3V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 5 days ago)
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Surface Mount YES
Number of Pins 8
Weight 72.603129mg
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e4
Feature Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Technology MOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Base Part Number TPS2021
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Power Supplies 3/5V
Interface On/Off
Current - Output (Max) 600mA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Voltage - Load 2.7V~5.5V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Turn On Time 20000 µs
Output Peak Current Limit-Nom 0.9A
Rds On (Typ) 33m Ω
Turn Off Time 40000 µs
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Output Current Flow Direction SOURCE
Height 1.75mm
Length 4.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2021DR Overview


Tape & Reel (TR) is how it's packaged.The 8-SOIC (0.154, 3.90mm Width) package contains it.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.It is equipped with Status Flag features.It is a member of the TPS2021 family.There are 8 terminations in it.In order to operate, the 8 pins are used.It consists of 1 functions.This LED driver has a maximum output of 600mAV.Using a voltage of 3.3V allows for high efficiency.There are 8 pins in total on this board.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.This part has a power supply of 3/5V.It has a maximum input voltage of 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.

TPS2021DR Features


Supplied from 3.3V

TPS2021DR Applications


There are a lot of Texas Instruments TPS2021DR Power Switches ICs applications.

  • Hot Swap
  • Portable Devices
  • Handheld Devices
  • Wearable Devices
  • USB Protection
  • Telecom and Network Systems
  • Solid State Drivers
  • Wireless/Networking Cards
  • Mobile Communication Devices
  • Hot Swaps

Write a review

Note: HTML is not translated!
    Bad           Good