TPS2021IDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 37mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2021 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 600mA |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2021IDRQ1 Overview
The LED driver's packaged as a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.A maximum voltage of N-Channel volts is available from the output of this LED driver.There are Status Flag features available on the LED driving board.It belongs to the TPS2021 family.The termination count is 8.It is necessary to use the 8 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.Maximum output current falls to 600mA when operation criteria are met.High efficiency is possible when the supply voltage is set to 3.3V.A total of 8 pins are included in this LED driver.Currently, the LED driving board has 37mOhm resistance.This electrical component is part of the Automotive, AEC-Q100 series.The output current is set to 0A in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this part, the power supply is set to 3/5V.Voltage input is limited to 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.
TPS2021IDRQ1 Features
Supplied from 3.3V
Resistance of 37mOhm
TPS2021IDRQ1 Applications
There are a lot of Texas Instruments TPS2021IDRQ1 Power Switches ICs applications.
- Handheld Devices
- Smart Phones, Feature Phones
- USB Power Distribution
- Portable/Handheld Devices
- Hot-Swap Systems
- HDD and SSD
- Low Voltage I/O System Power
- Solid-State Drives
- Set-Top Boxes
- Portable Video Game Players
