TPS2031DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2031 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Current - Output (Max) | 600mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 0.9A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2031DR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.As a default, the output is set to 1.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Status Flag features.The TPS2031 family contains this object.In total, there are 8 terminations.In order to operate, 8 pins are used.As far as the lighting driver is concerned, there are 1 functions.The lighting driver's maximum output is 600mAV.The supply voltage can be 3.3V for high efficiency.A total of 8 pins are included in this LED driver.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.This part has a power supply of 3/5V volts.This LED driving board can accept voltages up to 5.5V volts as an input.It requires 2.7V volts as the minimum input voltage.
TPS2031DR Features
Supplied from 3.3V
TPS2031DR Applications
There are a lot of Texas Instruments TPS2031DR Power Switches ICs applications.
- Notebook and Tablet Computers
- Wearable Devices
- USB Protection
- Portable Music Players
- Solid State Drivers
- USB Ports/Hubs
- Set-Top Boxes
- Portable GPS Device
- HDD, SSD
- Hot-Swap Systems
