TPS2033DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2033 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.5A |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 2.2A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2033DR Overview
Tape & Reel (TR) is how it's packaged.Package 8-SOIC (0.154, 3.90mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.There are Status Flag features available on the LED driving board.It belongs to the TPS2033 family.A total of 8 terminations have been found in it.In order to operate, the 8 pins are used.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 1.5A to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.This LED driver is equipped with a total of 8 pins.This LED driver is self-contained in an econtainer with a capacity of Peripheral Drivers.This part is powered by 3/5V.This LED driving board can accept voltages up to 5.5V volts as an input.There is a minimum input voltage of 2.7V volts.
TPS2033DR Features
Supplied from 3.3V
TPS2033DR Applications
There are a lot of Texas Instruments TPS2033DR Power Switches ICs applications.
- Wearable Devices
- USB Power Distribution
- Solid State Drivers
- USB3.1 Power Delivery
- PC Cards
- PC Card Hot Swap
- HDD, SSD
- Smart Phones, Feature Phones
- Hot Swaps
- Storage Drives
