TPS2034DR
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 61mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 725mW |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2034 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Power Supplies | 3/5V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | STANDARD |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Turn On Time | 20000 µs |
| Output Peak Current Limit-Nom | 3A |
| Rds On (Typ) | 33m Ω |
| Turn Off Time | 40000 µs |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
TPS2034DR Overview
The LED driver's packaged as a Tape & Reel (TR).Package 8-SOIC (0.154, 3.90mm Width) contains it.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.It has a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.There is a TPS2034 family of things that it belongs to.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.As far as the lighting driver is concerned, there are 1 functions.The supply voltage can be 3.3V for high efficiency.As a result, it has a total of 8 pins.The LED driver has 61mOhm resistance.The output current is set to 2A in this case.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.3/5V is the power supply of the part.The maximum input voltage is 5.5V volts.As a minimum input voltage, it requires 2.7V volts.
TPS2034DR Features
Supplied from 3.3V
Resistance of 61mOhm
TPS2034DR Applications
There are a lot of Texas Instruments TPS2034DR Power Switches ICs applications.
- Wireless Headsets
- HDD and SSD
- Storage Drives
- PC Cards
- Gaming
- Notebook PC
- Solid-State Drives
- Wireless/Networking Cards
- Wearable Devices
- Storage (HDDs, SSDs)
