Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
72.603129mg |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tube |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
400mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Power Management Circuits |
Power Rating |
585.82mW |
Max Power Dissipation |
585.82mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TPS2049 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
N-Channel |
Number of Channels |
1 |
Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Nominal Supply Current |
43μA |
Current |
100mA |
Output Configuration |
High Side |
Power Dissipation |
585.82mW |
Output Current |
0A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
1 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
1 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Rds On (Typ) |
400m Ω |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2049D Overview
It is packaged in the manner of a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts on this LED driver.It is equipped with Status Flag features.As you can see, it comes from the TPS2049 family.There are 8 terminations in it.During operation, the 8 pins are used.The LED driver has 1 functions.With a supply voltage of 5V, high efficiency is possible.There are 8 pins in total on this board.It has a resistance of 400mOhm.The output current is set to 0A in this case.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.Its maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.7V volts.
TPS2049D Features
Supplied from 5V
Resistance of 400mOhm
1 channels
TPS2049D Applications
There are a lot of Texas Instruments TPS2049D Power Switches ICs applications.
- Portable Video Game Players
- Set-Top Boxes
- Portable Devices
- Wireless Headsets
- Notebook PC
- Handheld Devices
- Hard Disk Drives
- Wearable Devices
- PC Card Hot Swap
- Smartphone and PDA