TPS2049DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 650mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 585mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2049 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 100mA |
| Nominal Supply Current | 43μA |
| Output Configuration | High Side |
| Power Dissipation | 585.82mW |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.07mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 1 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 400m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2049DR Overview
The LED driver's packaged as a Tape & Reel (TR).There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.The lighting driver has a total of 1 outputs that are available for use.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Status Flag features is available.It comes under the family of TPS2049.It contains 8 terminations.The operation is performed through the 8 pins.As far as functions are concerned, the lighting driver has 1.This lighting driver is capable of delivering a maximum output of 100mA volts.A supply voltage of 5V leads to high efficiency.In total, it has 8 pins.650mOhm resistance is present in the lighting driver.This case results in a 0A output current.A container with a capacity of Power Management Circuits contains this self-contained lighting driver.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.This LED driving board can accept voltages up to 5.5V volts as an input.It has a 2.7V volt minimum input voltage.It operates at a maximum supply current of 0.07mA.
TPS2049DR Features
Supplied from 5V
Resistance of 650mOhm
1 channels
TPS2049DR Applications
There are a lot of Texas Instruments TPS2049DR Power Switches ICs applications.
- Hot Swaps
- Notebook PC
- Telecom and Network Systems
- Solid State Drivers
- PDAs
- Wearable Devices
- Portable GPS Device
- PC Cards
- Portable GPS
- USB Protection
