TPS2052BD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | UNDERVOLTAGE LOCKOUT |
| Max Power Dissipation | 585.82mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 500mA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2052BD Overview
It's?packaged?in?the way?of?a?Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Status Flag.There is a TPS2052 family of things that it belongs to.A total of 8 terminations have been recorded.During operation, the 8 pins are used.Currently, the lighting driver has a total of 1 functions.As long as the supply voltage is 3.3V, high efficiency can be achieved.8 pins are connected to it in total.Currently, the LED driving board has 70mOhm resistance.In this case, the output current is set to 500mA.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.There are a total of 2 channels available.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.Through the use of this lighting driver, we can also produce UNDERVOLTAGE LOCKOUT.In order to operate, it requires at most 0.09mA amps of supply current.
TPS2052BD Features
Supplied from 3.3V
Resistance of 70mOhm
2 channels
Additional features like UNDERVOLTAGE LOCKOUT
TPS2052BD Applications
There are a lot of Texas Instruments TPS2052BD Power Switches ICs applications.
- Notebook and Tablet Computers
- Storage (HDDs, SSDs)
- PDAs
- Wireless Headsets
- Various applications equipped with buttons
- Smartphone and PDA
- USB Ports/Hubs
- Portable GPS Device
- Notebook PC
- USB Power Distribution
