TPS2052CDGNR

N-Channel 0.65mm PMIC TPS2052 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS2052CDGNR
Package: 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Datasheet: -
Stock: 639
Description: N-Channel 0.65mm PMIC TPS2052 8 Pin 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	TPS2052
Number of Outputs	2
Output Type	N-Channel
Operating Supply Voltage	5.5V
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Output Current	500mA
Voltage - Supply (Vcc/Vdd)	Not Required
Max Supply Current	120μA
Input Type	Non-Inverting
Turn On Delay Time	2.4 ms
Switch Type	General Purpose
Min Input Voltage	4.5V
Max Input Voltage	5.5V
Turn-Off Delay Time	3.25 ms
Ratio - Input:Output	1:2
Voltage - Load	4.5V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO
Switching	MAKE-BEFORE-BREAK
Rds On (Typ)	70m Ω
Height	1.1mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad
Number of Pins	8
Operating Temperature	-40°C~125°C TJ
Packaging	Cut Tape (CT)
JESD-609 Code	e4
Feature	Load Discharge, Status Flag
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
ECCN Code	EAR99
Resistance	95mOhm
Terminal Finish	Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)

TPS2052CDGNR Overview

Cut Tape (CT) is how it's packaged.This file is included in package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Exposed Pad.The LED driver is mounted as Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -40°C~125°C TJ for reliable operation.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Load Discharge, Status Flag features in order for it to be useful.I believe it belongs to the TPS2052 family.The 8 pins are used to operate the LED driver.The LED driving board is mounted in the way of Surface Mount.Lighting drivers with 95mOhm resistance are used.When this case is used, the output current is set to 500mA.The analog IC used in this lighting driver is SPST.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 5.5V volts.The minimum input voltage is 4.5V volts.For its operation, a maximum current requirement of 120μA is required.