TPS2066CDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Load Discharge, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2066 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 1μA |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 90m Ω |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2066CDR Overview
It is package in Tape & Reel (TR) case.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Mounting type Surface Mount is selected for the LED driving board.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It has a total of Load Discharge, Status Flag features.It belongs to the TPS2066 family.As a result, there are 8 terminations.It is necessary to use the 8 pins in order to operate the LED driver.The LED driving board has a total of 1 functions.Supply voltages of 5V allow for high efficiency.A total of 8 pins are included in this LED driver.70mOhm resistance is present in the lighting driver.The output current is set to 1A in this case.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We currently have 2 channels available.Its maximum input voltage is 5.5V volts.It has a 4.5V volt minimum input voltage.
TPS2066CDR Features
Supplied from 5V
Resistance of 70mOhm
2 channels
TPS2066CDR Applications
There are a lot of Texas Instruments TPS2066CDR Power Switches ICs applications.
- Portable GPS
- Wireless/Networking Cards
- USB Ports/Hubs
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Solid-State Drives
- Various applications equipped with buttons
- Mobile Communication Devices
- HDD and SSD
- Portable Music Players
