Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Weight |
75.891673mg |
Operating Temperature |
0°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
80mOhm |
Subcategory |
Peripheral Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2082 |
Pin Count |
8 |
Output Type |
N-Channel |
Max Output Current |
500mA |
Operating Supply Voltage |
5.5V |
Power Supplies |
3/5V |
Interface |
On/Off |
Nominal Supply Current |
85μA |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
85μA |
Quiescent Current |
85μA |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Min Input Voltage |
2.7V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Input Characteristics |
STANDARD |
Voltage - Load |
2.7V~5.5V |
Driver Number of Bits |
2 |
Min Current Limit |
700mA |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Output Peak Current Limit-Nom |
1A |
Rds On (Typ) |
80m Ω |
Turn Off Time |
40000 µs |
Built-in Protections |
TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
Height |
1.75mm |
Length |
4.9mm |
Width |
3.91mm |
Thickness |
1.58mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2082DR Overview
Tape & Reel (TR) is how it's packaged.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.There is a switch type of General Purpose.To ensure reliable operation, set the temperature to 0°C~125°C TJ.In order to operate, it requires a voltage supply of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.A lighting driver with Status Flag features is available.It belongs to the TPS2082 family.It consists of 8 terminations in total.In order to operate, the 8 pins are used.It is important to note that the LED driving board has 2 functions.Maximum output current falls to 500mA when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 3.3V.A total of 8 pins are included in this LED driver.In this case, there is 80mOhm resistance in the LED driving board.The output current is set to 500mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.In this part, the power supply is set to 3/5V.In order to maximize efficiency, the supply voltage should be set at 5.5V.This LED driver can handle voltages up to 5.5V volts.There is a minimum input voltage of 2.7V volts for this LED driver.For its operation, a current of 85μA is required.It is equipped with 2 input.
TPS2082DR Features
Supplied from 3.3V
Resistance of 80mOhm
TPS2082DR Applications
There are a lot of Texas Instruments TPS2082DR Power Switches ICs applications.
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Notebook PC
- Notebook and Tablet Computers
- USB Protection
- Gaming
- Set-Top Boxes
- Portable Video Game Players