TPS2097DG4
| Parameters | |
|---|---|
| Output Peak Current Limit-Nom | 0.5A |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height | 1.58mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | SOIC |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 155.100241mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Max Output Current | 250mA |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 3/5V |
| Temperature Grade | OTHER |
| Nominal Supply Current | 85μA |
| Max Supply Current | 85μA |
| Current - Output | 250mA |
| Quiescent Current | 85μA |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 4 |
| Min Current Limit | 300mA |
| Turn On Time | 20000 µs |
TPS2097DG4 Overview
It's included in the SOIC package.The terminations total 16.In this case, the device is located at terminal DUAL.Hot-swappable device has a total of 16 pins on Hot-swappable device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 3.3V.Hot-swappable device is necessary to use 16 pins in order to operate the device.Despite its self-contained nature, Peripheral Drivers is a very compact device.For stable operation, the maximum operating temperature should be 85°C°C.Hot-swappable device operates at a minimum temperature of 0°C degrees Celsius in order to ensure reliabilHot-swappable devicey.Part 3/5V is associated with power supplies.By default, it is set to output 4.In order to meet the operation criteria, the maximum output current has to be reduced to 250mA.There is a maximum current requirement of 85μA for it to operate.Hot Swap has 80mOhm resistance.
TPS2097DG4 Features
The terminal position of 16
TPS2097DG4 Applications
There are a lot of Texas Instruments TPS2097DG4 hot swap controllers applications.
- Storage network
- Identify faulty boards
- Short-circuit protection in real time
- Current monitor output
- USB interface
- Limitting the inrush current
- Network switches
- Modern analog communication
- Power monitoring
- Redundant negative voltage supplies
