Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 5 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
13.012431mg |
Operating Temperature |
-40°C~70°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Source Selector Switch |
Resistance |
375mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
Handheld/Mobile Devices |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
309mW |
Voltage - Supply |
2.7V~4V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
TPS2100 |
Pin Count |
5 |
Number of Outputs |
1 |
Operating Supply Voltage |
4V |
Supply Voltage-Max (Vsup) |
4V |
Number of Channels |
2 |
Current - Output (Max) |
500mA 10mA |
Nominal Supply Current |
10μA |
Power Dissipation |
309mW |
Output Current |
500mA |
Adjustable Threshold |
NO |
Propagation Delay |
370 μs |
Turn On Delay Time |
370 μs |
Min Input Voltage |
2.7V |
FET Type |
N and P-Channel |
Number of Inputs |
2 |
Max Input Voltage |
4V |
Nominal Input Voltage |
4V |
Ratio - Input:Output |
2:1 |
Internal Switch(s) |
Yes |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2100DBVR Overview
A SC-74A, SOT-753 case is included. Tape & Reel (TR) cases are suitable for packing the part. In this case, the part is mounted in the Surface Mount direction. We give it a voltage of 2.7V~4V. It is not allowed for this component to operate below -40°C~70°C degrees. It fits perfectly with the component connected to Handheld/Mobile Devices. Source Selector Switch is the category for the device. A type of FET known as N and P-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. There are 5 terminations available in the part. In this case, 5 pins have been used to design it. Using TPS2100 as a basis, the part is constructed. It is powered by 3.3V to deliver its perfomance. Run 260 using this part's peak reflow temperature. In this case, the part belongs to the Power Management Circuits family. It is important to note that the part has 5 pins. In order to reach the maximum supply voltage, Vsup has to reach a value of 4V. A 1 output is available on the board. It is recommended to mount the part by Surface Mount. A chip can work when its output current drops below 500mA 10mA. An input voltage over 4V V can be used with this chip. With an input voltage less than 2.7V V, the chip can be used. The output current that can be delivered to the component is determined by the 500mA value. When supplied with a voltage of 4V, this device will function. In order to run the part, it needs 2 inputs. 375mOhm is the range in which the device's resistance should remain.
TPS2100DBVR Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2100DBVR Applications
There are a lot of Texas Instruments TPS2100DBVR Ideal Diode controller applications.
- Power Tools
- Camera ECU
- Modems
- Motor drives
- Automotive USB hubs
- Alternator
- Active ORing for redundant power
- PCs
- Automotive infotainment systems - head unit,telematics control unit
- Head Unit