TPS2101DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 1.3Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 309mW |
| Voltage - Supply | 2.7V~4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2101 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Number of Channels | 2 |
| Current - Output (Max) | 500mA 10mA |
| Nominal Supply Current | 10μA |
| Power Dissipation | 309mW |
| Output Current | 500mA |
| Max Supply Current | 16μA |
| Adjustable Threshold | NO |
| Propagation Delay | 370 μs |
| Turn On Delay Time | 370 μs |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 4V |
| Nominal Input Voltage | 4V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2101DBVR Overview
The case is SC-74A, SOT-753-shaped. Parts should be packed in Tape & Reel (TR) cases. I would like to point out that the part is mounted in the way of Surface Mount. An electric current of 2.7V~4V is applied to it. There must not be a minimum operating temperature of -40°C~70°C for this component. It is fitting for the component connected in Handheld/Mobile Devices. As a Source Selector Switch-type device, it is categorized. The FET type can be recognized as N and P-Channel. 5 terminations are available in the part. It is designed with 5 pins. It is based on the TPS2101 component. Powered by 3.3V, it delivers high performance. A maximum reflow temperature of this part is used if 260 is to be run. A part from the Power Management Circuits family is what we are talking about. Several 5 pins are incorporated into the part. There is a limit to the maximum supply voltage when Vsup reaches 4V. In this case, 1 outputs are available. Surface Mount is recommended for mounting the part. The chip can work when the output current conducts under 500mA 10mA. It is possible to use this chip with an input voltage that exceeds 4V volts. It is possible to use this chip with an input voltage below 2.7V volts. The component can receive an output current of 500mA. It can be operated at 4V supply voltage. In order to run the part, it needs 2 inputs. Keeping the device resistance within 1.3Ohm is recommended.
TPS2101DBVR Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2101DBVR Applications
There are a lot of Texas Instruments TPS2101DBVR Ideal Diode controller applications.
- Automotive ADAS systems - camera
- Cell phones
- PCs
- Active ORing for redundant power supplies
- Automotive battery protection
- Industrial transport
- Active OR-ing of Redundant (N+1) Power Supplies
- Factory automation and control - PLC digital output modules
- Camera ECU
- Active ORing for redundant power
