TPS2103DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.7V~4V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | TPS2103 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 4V |
| Supply Voltage-Max (Vsup) | 4V |
| Power Supplies | 3.3V |
| Number of Channels | 1 |
| Current - Output (Max) | 500mA 100mA |
| Output Current | 100mA |
| Adjustable Threshold | NO |
| Current - Supply | 14μA |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 4V |
| Nominal Input Voltage | 4V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2103DBVR Overview
The case is made of SC-74A, SOT-753 plastic. Packing the part in Tape & Reel (TR) cases is ideal. The part is mounted in the way of Surface Mount. With 2.7V~4V as its voltage, it is given a temperature of 0°C. It is not acceptable to operate this component below -40°C~70°C degrees Celsius. Suitable for components connected in Handheld/Mobile Devices. The device is categorized as Source Selector Switch. A type of FET known as N and P-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. There are 5 terminations available in the part. As you can see, it is designed with 5 pins. TPS2103 is the base of this part. 3.3V provides its performance. For 260, the peak reflow temperature of this part is used. The purpose of this is to make sure that the supply current for the component at 14μA is running as it should be. A Power Management Circuits family part is involved in the project. Several 5 pins are incorporated into the part. Upon reaching 4V, the maximum supply voltage (Vsup) is reached. 3.3V is the voltage it can deliver. As part of the outputs, there is a 1 output. As a rule of thumb, the best result is achieved when the part is mounted by the Surface Mount axis. Chips can work when the output current carries under 500mA 100mA. Chips can be used with input voltages of more than 4V volts. There are only a few chips on the market that can be used with an input voltage lower than 2.7V volts. As a result, 100mA is the maximum output current that can be delivered to the component. It is possible for this device to operate at a voltage of 4V. This part has a 2 input that allows it to run.
TPS2103DBVR Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 4V
2 inputs
TPS2103DBVR Applications
There are a lot of Texas Instruments TPS2103DBVR Ideal Diode controller applications.
- MP3 Players
- PDAs
- Power Tools
- Electricity meters
- Active ORing for redundant power
- Camera ECU
- Motor drives
- Industrial transport
- Automotive battery protection
- Alternator
