TPS2104DBVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | TPS2104 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Current - Output (Max) | 500mA 100mA |
| Output Current | 500mA |
| Current - Supply | 18μA |
| Min Input Voltage | 2.7V |
| FET Type | N and P-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2104DBVR Overview
There is a SC-74A, SOT-753 case that comes with it. Packing the part in Tape & Reel (TR) cases is ideal. There is a Surface Mount-axis mounted on the part. We give it a voltage of 2.7V~5.5V. It must not be possible for this component to operate at -40°C~85°C°C as its minimum operating temperature. There is a perfect fit between it and the component connected in Handheld/Mobile Devices. As a Source Selector Switch-type device, it is categorized. There is a N and P-Channel type of FET. In the part there are 5 terminations that are available. There are 5 pins on the board and it is designed with them. As you can see, this part is based on TPS2104. To deliver its performance, it's powered by the 5V platform. This part's peak reflow temperature is utilized to run 260. To run supply current of the part at 18μA. As far as I know, the part belongs to the Power Management Circuits family. There are 5 pins in the part. In addition, there are 1 outputs available for use. It is recommended to mount the part in Surface Mount-direction. A chip can work if the output current conducts under a certain value called 500mA 100mA. It can work with voltages greater than 5.5VV as an input voltage. With an input voltage less than 2.7V V, the chip can be used. Parts can be delivered with 500mA output current. There is a specific output current that can be delivered to the component, which is called 500mA. When supplied with a voltage of 5.5V, this device will function. A 2 input is required to run the part.
TPS2104DBVR Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2104DBVR Applications
There are a lot of Texas Instruments TPS2104DBVR Ideal Diode controller applications.
- Digital Radios
- Motor drives
- Digital Cameras
- Automotive infotainment systems - head unit,telematics control unit
- Camera ECU
- ADAS domain controller
- Automotive ADAS systems - camera
- PDAs
- Reverse Polarity Protection
- MP3 Players
