Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 6 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Weight |
13.012431mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Source Selector Switch |
Resistance |
2.4Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
Handheld/Mobile Devices |
Subcategory |
Power Management Circuits |
Max Power Dissipation |
309mW |
Voltage - Supply |
2.7V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
TPS2105 |
Pin Count |
5 |
Number of Outputs |
1 |
Max Output Current |
100mA |
Operating Supply Voltage |
5.5V |
Number of Channels |
2 |
Operating Supply Current |
18μA |
Current - Output (Max) |
500mA 100mA |
Nominal Supply Current |
10μA |
Output Current |
500mA |
Max Supply Current |
35μA |
Min Input Voltage |
2.7V |
FET Type |
N and P-Channel |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
2:1 |
Internal Switch(s) |
Yes |
Height |
1.45mm |
Length |
2.9mm |
Width |
1.6mm |
Thickness |
1.2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS2105DBVR Overview
It comes in SC-74A, SOT-753 case. A Tape & Reel (TR) case is a good choice for packing the part. The part is mounted in the way of Surface Mount. We give it a voltage of 2.7V~5.5V. It is essential that the minimal operating temperature of this component is not -40°C~85°C. Suitable for components connected in Handheld/Mobile Devices. There is a Source Selector Switch category assigned to the device. It is possible to recognize the FET type as N and P-Channel. A 5 termination is available on the part. Pins are attached to it using 5 pins. TPS2105 underpins the part. This device is powered by 5V in order to deliver a high level of performance. For 260, the peak reflow temperature of this part is used. The part is from Power Management Circuits family. As you can see, the part is equipped with 5 pins. For the operation of this device, an electric current of 18μA is used as the supply current. There are 1 outputs. In order to mount the part properly, it is recommended to mount it by Surface Mount. A chip can work when its output current drops below 500mA 100mA. It can work with voltages greater than 5.5VV as an input voltage. It is possible to use the chip if the input voltage is less than 2.7V Volts. The part is capable of being delivered under 100mA output current. In this case, 500mA is a value that represents the maximum output current that can be delivered to the component. It is possible to operate this device with a supply voltage of 5.5V. For this part to run, 2 inputs are required. 2.4Ohm is the range in which the device's resistance should remain.
TPS2105DBVR Features
in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2105DBVR Applications
There are a lot of Texas Instruments TPS2105DBVR Ideal Diode controller applications.
- Electricity meters
- Automotive battery protection
- Alternator
- Power supply reverse polarity protection
- Factory automation and control - PLC digital output modules
- AC Rectifier
- MP3 Players
- Industrial motor drives
- Building automation
- ADAS domain controller