banner_page

TPS2105DBVT

TPS2105DBVT datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS2105DBVT
  • Package: SC-74A, SOT-753
  • Datasheet: -
  • Stock: 915
  • Description: TPS2105DBVT datasheet pdf and PMIC - OR Controllers, Ideal Diodes product details from Texas Instruments stock available at Noco(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 day ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Weight 13.012431mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
Type Source Selector Switch
Resistance 435mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Applications Handheld/Mobile Devices
Subcategory Power Management Circuits
Voltage - Supply 2.7V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number TPS2105
Pin Count 5
Number of Outputs 1
Max Output Current 500mA
Operating Supply Voltage 5.5V
Number of Channels 2
Operating Supply Current 18μA
Current - Output (Max) 500mA 100mA
Output Current 500mA
Min Input Voltage 2.7V
FET Type N and P-Channel
Number of Inputs 2
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Ratio - Input:Output 2:1
Internal Switch(s) Yes
Height 1.45mm
Length 2.9mm
Width 1.6mm
Thickness 1.2mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS2105DBVT Overview


The case that it comes in is called SC-74A, SOT-753 case. In Cut Tape (CT) cases, the part will be well protected. I would like to point out that the part is mounted in the way of Surface Mount. With 2.7V~5.5V as its voltage, it is given a temperature of 0°C. This component's minimum operating temperature must not be -40°C~85°C. It is suitable for the component connected in Handheld/Mobile Devices. There is a Source Selector Switch category assigned to the device. A type of FET known as N and P-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. The part is available with 5 terminations as an option. There are 5 pins on it. TPS2105 underpins the part. Powered by 5V, it is capable of delivering its performance to its customers. For 260, the peak reflow temperature of this part is used. As far as I know, the part belongs to the Power Management Circuits family. There are 5 pins in the part. It uses a current of 18μA for powering its operation. 1 outputs are available in the system. As a rule of thumb, the best result is achieved when the part is mounted by the Surface Mount axis. A chip can work when its output current drops below 500mA 100mA. An input voltage over 5.5V V can be used with this chip. With an input voltage less than 2.7V volts, it is possible to use the chip. Delivery of the part is possible under 500mA output current. There is a specific output current that can be delivered to the component, which is called 500mA. It is possible for this device to operate when the supply voltage is 5.5V. This part has a 2 input that allows it to run. Keeping the device resistance within 435mOhm is recommended.

TPS2105DBVT Features


in a SC-74A, SOT-753 case
FET Type: N and P-Channel
5 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs

TPS2105DBVT Applications


There are a lot of Texas Instruments TPS2105DBVT Ideal Diode controller applications.

  • Automotive USB hubs
  • USB HUBs
  • Industrial motor drives
  • Asset tracker
  • Factory automation and control - PLC digital output modules
  • Building automation
  • PDAs
  • Active ORing for redundant power
  • Digital Cameras
  • MP3 Players

Write a review

Note: HTML is not translated!
    Bad           Good