TPS2110PW
| Parameters | |
|---|---|
| Internal Switch(s) | Yes |
| Current - Output 2 | 750mA |
| Delay Time - OFF | 3ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 120mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 386.84mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2110 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 750mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Output Current | 750mA |
| Adjustable Threshold | YES |
| Turn On Delay Time | 500 μs |
| Current - Supply | 55μA |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 2:1 |
TPS2110PW Overview
It comes in 8-TSSOP (0.173, 4.40mm Width) case. As a result, it is suitable for packing the part in the Tube case. There are two ways in which this part is mounted. An electric current of 2.8V~5.5V is applied to it. In order for this component to operate correctly, its minimum operating temperature must not be -40°C~85°C. It is fitting for the component connected in Handheld/Mobile Devices. Source Selector Switch is the category for the device. A N-Channel-type FET can be identified. The part is available with 8 terminations as an option. There are 8 pins on the board and it is designed with them. It is based on TPS2110. To deliver its performance, it's powered by the 2.8V platform. To run 260, we utilize the part's peak reflow temperature. Using 55μA to run part supply current. The part is from Power Management Circuits family. There are 8 pins in the part. Current supply (Isup) must conduct under 0.09mA. There are outputs that can be connected to 1. This chip can be used with an input voltage of more than 5.5V volts without any problems. A voltage less than 2.8VV can be used to drive the chip. Parts can be delivered with 750mA output current. The output current that can be delivered to the component is determined by the 750mA value. It is possible for this device to operate when the supply voltage is 5.5V. The part has 2 inputs to run. A maximum output voltage of 6V can be obtained from this device. The device resistance should stay within the range of 120mOhm.
TPS2110PW Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2110PW Applications
There are a lot of Texas Instruments TPS2110PW Ideal Diode controller applications.
- Factory automation and control - PLC digital output modules
- Electricity meters
- Automotive ADAS systems - camera
- Digital Radios
- Asset tracker
- Reverse Polarity Protection
- Power supply reverse polarity protection
- Motor drives
- Modems
- Industrial transport
