TPS2111APWG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2111 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Operating Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2111APWG4 Overview
A 8-TSSOP (0.173, 4.40mm Width) case is included with it. In Tube cases, it is convenient to pack the part. The part is mounted in the way of Surface Mount. There is a voltage of 2.8V~5.5V applied to it. This component's minimum operating temperature must not be -40°C~85°C. The component connected in Handheld/Mobile Devices is suitable for this component. There is a Source Selector Switch classification for the device. In the case of FETs, N-Channel is recognized as the type. The part is available with 8 terminations. In this case, 8 pins have been used to design it. It is based on TPS2111. Powered by 2.8V, it delivers high performance. Run 260 using this part's peak reflow temperature. It is a part from the Power Management Circuits family. Several 8 pins are incorporated into the part. It operates using 55μA supply current. There should be a current flow in the supply line (Isup) under 0.09mA. The 1 outputs are available for use. If the input voltage is greater than 5.5VV, this chip is capable of being used. With an input voltage less than 2.8V V, the chip can be used. In terms of output current, the part can be delivered under 1.25A output current. As a result, 1.25A is the maximum output current that can be delivered to the component. It is possible for this device to operate when the supply voltage is 5.5V. Runs on 2 inputs.
TPS2111APWG4 Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
2 inputs
TPS2111APWG4 Applications
There are a lot of Texas Instruments TPS2111APWG4 Ideal Diode controller applications.
- Digital Radios
- Building automation
- Active ORing for redundant power supplies
- Industrial transport
- Head Unit
- ADAS domain controller
- Factory automation and control - PLC digital output modules
- Alternator
- USB HUBs
- Modems
