TPS2111APWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 39.008944mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Resistance | 84mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Handheld/Mobile Devices |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 387mW |
| Voltage - Supply | 2.8V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.8V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS2111 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Max Output Current | 1.25A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Operating Supply Current | 55μA |
| Nominal Supply Current | 55μA |
| Output Current | 1.25A |
| Adjustable Threshold | YES |
| Turn On Delay Time | 1 ms |
| Min Input Voltage | 2.8V |
| FET Type | N-Channel |
| Max Input Voltage | 5.5V |
| Supply Current-Max (Isup) | 0.09mA |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 ms |
| Ratio - Input:Output | 2:1 |
| Internal Switch(s) | Yes |
| Current - Output 2 | 1.25A |
| Drain to Source Resistance | 84mOhm |
| Delay Time - ON | 1ms |
| Height | 1.2mm |
| Length | 3mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS2111APWR Overview
There is a 8-TSSOP (0.173, 4.40mm Width) case that comes with it. In this case, it is suitable to pack the part in a Tape & Reel (TR) case. Surface Mount is the way the part is mounted. With 2.8V~5.5V as its voltage, it is given a temperature of 0°C. It is not acceptable to operate this component below -40°C~85°C degrees Celsius. The component connected in Handheld/Mobile Devices is suitable for this component. It is classified as a Source Selector Switch device by the manufacturer. In the case of FETs, N-Channel is recognized as the type. The part is available with 8 terminations. There are 8 pins on it. It is based on the TPS2111 component. Performance is delivered by 2.8V. For the purpose of running 260, this part's peak reflow temperature is utilized. A Power Management Circuits family part is involved in the project. Among the pins on the part are 8 pins. A supply current of 55μA is used to operate the device when it is in operation. Current supplies (Isup) should run under 0.09mA. As part of the outputs, there is a 1 output. It can work with voltages greater than 5.5VV as an input voltage. It is possible to use the chip if the input voltage is less than 2.8V Volts. It is possible to deliver the part under a 1.25A output current. The component can receive an output current of 1.25A. It is possible to operate this device with a supply voltage of 5.5V. This device's maximum output voltage is 6V. Device resistance should remain within the range of 84mOhm throughout the duration of the test.
TPS2111APWR Features
in a 8-TSSOP (0.173, 4.40mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
1 outputs
operate supply voltage at 5.5V
TPS2111APWR Applications
There are a lot of Texas Instruments TPS2111APWR Ideal Diode controller applications.
- Automotive USB hubs
- Asset tracker
- Digital Radios
- Active OR-ing of Redundant (N+1) Power Supplies
- Industrial transport
- Automotive ADAS systems - camera
- MP3 Players
- Active ORing for redundant power supplies
- Cell phones
- Digital Cameras
